Email
[email protected]
Email
Carey Alloys is a regarded organization that is basically occupied with giving an across the board assortment of ASTM B338 Gr 2 Titanium Pipes & Tubes. We offer an extensive variety of ASTM B338 Titanium Grade 2 Pipes & Tubes that are being fabricated from subjective raw material. Known for its solidness, corrosion resistance and high caliber, these ASTM B338 Grade 2 titanium Pipes & Tubes are widely utilized as a part of various commercial ventures everywhere throughout the globe.
In the interim, these are marginally more grounded than Grade 1, yet similarly as corrosion safe in a wide assortment of situations. As a supplier, stockiest, exporter and maker, we give these Titanium Alloys Gr 2 Pipes & Tubes in custom-assembled thicknesses and sizes as indicated by careful necessities of our very much respected supporters. We offer the same at practical costs to our clients.
We carry a full inventory of Titanium Alloy Seamless Pipes and Tube and Supply Titanium Alloy Welded Pipes and Tube products are choose owing to its superior corrosion resistance and strength-to-weight ratio. The development of many different alloys has extended the application of titanium in industries ranging from industrial and chemical processing to power generation. This grade possesses good weldability, strength, ductility and formability. This makes Grade 2 titanium bar and sheet are the prime choice for many fields of applications:
| Grade | Titanium GR-2 (UNS R50400) |
|---|---|
| Standard | ASTM B861, B338, B388, B862 / ASME SB861, SB338, SB388, SB862 |
| Pipe Range | ½”NB to 24”NB / SCH 10 – SCH XXS |
| Tubes Range | 1mm OD to 254mm OD / Thickness 0.1 to 20mm. |
| Type | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
| Form | Round, Square, Rectangular, Hydraulic Etc. |
| End | Plain End, Bevelled End, Threaded |
| Length | Single Random, Double Random & Cut Length |
| C | Fe | H | N | O | Ti |
|---|---|---|---|---|---|
| max | max | max | max | max | max |
| 0.1 | 0.3 | 0.015 | 0.03 | 0.25 | 99.2 |
| Hardness, Knoop | 170 | 170 | |
|---|---|---|---|
| Hardness, Rockwell B | 80 | 80 | |
| Hardness, Vickers | 145 | 145 | |
| Tensile Strength, Ultimate | 344 MPa | 49900 psi | |
| Tensile Strength, Yield | 275 - 410 MPa | 39900 - 59500 psi | |
| Elongation at Break | 20 % | 20 % | |
| Reduction of Area | 35 % | 35 % | |
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poisson's Ratio | 0.37 | 0.37 | |
| Izod Impact | 114 - 171 J | 84.1 - 126 ft-lb | |
| Fatigue Strength | 300 MPa | 43500 psi | 1E+7 cycles, Unnotched |
| Fatigue Strength | 425 MPa | 61600 psi | 30,000 cycles, Unnotched |
| Fracture Toughness | 66 MPa-m½ | 60.1 ksi-in½ | K(Q); annealed |
| Shear Modulus | 45 GPa | 6530 ksi |
| Physical Properties | Metric | English |
|---|---|---|
| Density | 4.51 g/cc | 0.163 lb/in³ |
Titanium's outstanding corrosion resistance is due to the formation of a tightly adherent oxide film on its surface. When damaged, this thin invisible layer immediately reforms, maintaining a surface which is completely resistant to corrosive attack in sea water and all natural environments. This oxide is so resistant to corrosion that titanium components often look brand new even after years of service.
Carey Alloys exports their products to countries like UAE, Bahrain, Italy, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria, Kuwait, Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan & Saudi Arabia.
